arm, at91: add icache support

add at least icache support for at91 based boards.
This speeds up NOR flash access on an at91sam9g15
based board from 15.2 seconds reading 8 MiB from
a SPI NOR flash to 5.7 seconds.

Signed-off-by: Heiko Schocher <[email protected]>
Reviewed-by: Simon Glass <[email protected]>
Reviewed-by: Andreas Bießmann <[email protected]>

diff --git a/arch/arm/mach-at91/arm926ejs/Makefile b/arch/arm/mach-at91/arm926ejs/Makefile
index ddc323f6415dd5c16093754ca3a0c9e070bbaf54..d36e15a51cc04d667a0e0e9f6874e9c8f4dd3adf 100644 (file)
--- a/arch/arm/mach-at91/arm926ejs/Makefile
+++ b/arch/arm/mach-at91/arm926ejs/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_AT91SAM9N12)     += at91sam9n12_devices.o
 obj-$(CONFIG_AT91SAM9X5)       += at91sam9x5_devices.o
 obj-$(CONFIG_AT91_EFLASH)      += eflash.o
 obj-$(CONFIG_AT91_LED) += led.o
+obj-y += cache.o
 obj-y += clock.o
 obj-y += cpu.o
 obj-y  += reset.o

diff --git a/arch/arm/mach-at91/arm926ejs/cache.c b/arch/arm/mach-at91/arm926ejs/cache.c
new file mode 100644 (file)
index 0000000..8813706
--- /dev/null
+++ b/arch/arm/mach-at91/arm926ejs/cache.c
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2016
+ * Heiko Schocher, DENX Software Engineering, [email protected].
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+#include <linux/types.h>
+#include <common.h>
+
+void enable_caches(void)
+{
+#ifndef CONFIG_SYS_ICACHE_OFF
+       icache_enable();
+#endif
+}
+
+#ifndef CONFIG_SYS_ICACHE_OFF
+/* Invalidate entire I-cache and branch predictor array */
+void invalidate_icache_all(void)
+{
+       unsigned long i = 0;
+
+       asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (i));
+}
+#else
+void invalidate_icache_all(void)
+{
+}
+#endif

diff --git a/board/bluewater/gurnard/gurnard.c b/board/bluewater/gurnard/gurnard.c
index 2a36d29788c631a57b91e126ced45b666796142c..08b1401372c9fb2034db9e2f47d44b9bc3a88c56 100644 (file)
--- a/board/bluewater/gurnard/gurnard.c
+++ b/board/bluewater/gurnard/gurnard.c
@@ -414,12 +414,6 @@ void reset_phy(void)
 {
 }
 
-/* This breaks the Ethernet MAC at present */
-void enable_caches(void)
-{
-       dcache_enable();
-}
-
 /* SPI chip select control - only used for FPGA programming */
 #ifdef CONFIG_ATMEL_SPI